Fitting Tools

Hand Held Staplers & Nailers

**(1.) Tab and Stapler-Driving Fitting Tools:**
	OMT53 Tab Tool Drives Flextabs® Flexible fitting points for photo and poster frames. Lightweight, single shot tool. Also available in a repeating valve model. Weight 1.3 lbs.
	FFT18A Frame Fitting Tool Drives both Flextabs® flexible fitting points and Hardtabs® permanent fitting points. Variable speed automatic trigger from single shot up to 8 per second. Weight 2.3 lbs.
	FFT18AF Automatic Fitting Tool with tab flattener Drives both Flextabs® flexible fitting points and Hardtabs® permanent fitting points. Variable speed automatic trigger from single shot up to 8 per second. Presses tabs flat after driving them. Weight 2.6 lbs.
	BEA 7116 Stapler Drives .030" "71" or "C" series 3/8" crown staples from 3/8" to 5/8" in length. Proven durability and reliability Weight 2 lbs.
	BEA 38016-420 Stapler Drives staples in leg lengths from 5/32" to 5/8". Low air consumption, durability and ease of maintenance make the 420 stapler a real cost saver.
	JKT67020ALMP Repeating Valve Stapler Drives .030" thick staples, 3/8" crown, up to 9/16" leg length. Special nosepiece leaves staples approx. 3/8" above flush. Also available in single shot and short magazine versions. Weight 2.4 lbs.

**(2.) Brad Nailers:**
	SENCO SLP20 18 Gauge Brad Nailer Drives 18 gauge brads from 5/8" to 1 5/8" in length. Oil free design requires no lubrication. Weight 2.3 lbs.		18 gauge brad
	SENCO Finish Pro 25 Drives 18 gauge brads from 5/8" to 2 1/8" in length. Oil free design requires no lubrication. Adjustable depth control. Adjustable exhaust. Weight 2.7 lbs.		18 gauge brad
	MG30 Mini-Bradder Drives 21 gauge slight headed brads from 1/2" up to 1 3/16" in length. Small nail head size leaves a smaller nail hole. Small tool, easy to maneuver. Weight 2.1 lbs.		21 gauge slight headed brad
	GRTP635 Drives 23 gauge headless pins from 3/8" up to 1 3/8" in length. No head design leaves a very small nail hole, often no need to fill. Weight 2.2 lbs.		23 gauge headless brad
	GRTP645 Drives 23 gauge headless pins from 3/8" up to 1 3/4" in length. No head design leaves a very small nail hole, often no need to fill. Weight 2.8 lbs.		23 gauge headless brad